MTL5018 MTL Instruments Proximity Detector Interface Number Of Channels 2

MTL5018 MTL Instruments Proximity Detector Interface
 
The MTL5018 enables two safe-area loads to be controlled by two
switches or proximity detectors located in a hazardous area. Two
relay outputs are provided. Independent phase reversal control allows
an alarm condition to be signalled for either state of the sensor. A
selectable line fault detect (LFD) facility detects an open or short
circuit in either field circuit.
 
SPECIFICATION
See also common specification
• Number of channels
     Two
• Location of switches
     Zone 0, IIC, T6 hazardous area
     Div. 1, Group A hazardous location
• Location of proximity detector
     Zone 0, IIC, T4–6 hazardous area if suitably certified
     Div. 1, Group A hazardous location
• Safe-area output
     Two relays with changeover contacts
• Hazardous-area inputs
     Inputs conforming to NAMUR/DIN 19234 standards for proximity detectors
• Voltage applied to sensor
     7 to 9V from 1kΩ ±10%
• Input/output characteristics
     Normal (reverse) phase:
           output energised (de-energised) if Iin >2.1mA or Rin <2kΩ
           output de-energised (energised) if Iin <1.2mA or Rin >10kΩ
     Hysteresis: 200µA, typical
• Line fault detection (LFD)
     User-selectable via switches on the top of the unit. Line faults are indicated by an LED for each channel. A detected line fault de-energises the       relay.
     Open-circuit alarm on if Iin<100µA
     Open-circuit alarm off if Iin>250µA
     Short-circuit alarm on if Rin<100Ω
     Short-circuit alarm off if Rin>360Ω
     Note: Resistors must be fitted when using the LFD facility with a contact input
     500Ω to 1kΩ in series with switch
     20kΩ to 25kΩ in parallel with switch
• Phase reversal
     Independent for each channel, user-selectable
• Relay type
     Single pole, changeover contacts
     Note: reactive loads must be adequately suppressed
• Relay characteristics
Response time: 10ms maximum
     Contact rating: 250V ac, 2A, cosø >0.7
     40V dc, 2A, resistive load
• LED indicators
     Green: power indication
     Yellow: two: status of each channel (on when outputs are energised)
     Red: two: LFD indication for each channel (on when line fault detected)
• Maximum current consumption
     60mA at 20V
     60mA at 24V
     40mA at 35V
• Maximum power dissipation
     1.4W at 24V
     1.5W at 35V
• Isolation
     250V ac or dc between power supply, hazardous-area circuits and relay outputs
• Safety description (each channel)
     10.5V, 800Ω, 14mA, Um= 250V rms or dc
 

 
 
Related Models:

 
Company Introduction:
Achievers Automation Limited has more than 10 years experience in the market of Industrial Automation, specialized in reselling factory sealed Probe, Sensor, DCS,isolator barrier, HMI, PLC,Adapter,Profibus connector and cable from Brands as BENTLY NEVADA, Endress+Hauser, YOKOGAWA,MTL,Allen-Bradley, Pepperl+Fuchs,Rosemount, ASCO, Schneider, Lenze, Pro-face, Mitsubishi, Omron, Lenze, Delta, Honeywell, Siemens and etc. If you have any request, please do not hesitate to contact us.
 
FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.

MTL5018 MTL Instruments

MTL Instruments MTL5018

MTL5018

MTL5018 MTL Instruments Proximity Detector Interface Number Of Channels 2 Images